Table of Contents
Advertisement
Charging the Battery (Twinny Plus, Kivo Plus)
For the best performance and to prolong the life
of the battery, we recommend that you charge
the battery at home at room temperature.
Only use the charger if the temperature of
the environment is between 0 and 35
degrees centigrade.
To charge the battery:
1. Unlock the battery by turning the key a quarter.
2. Push down and hold the lock. Then pull the battery
out of the holder with your other hand.
3. Take the battery pack inside. First plug the charger
into the socket. The green LED will light up. The
charger is now on standby.
4. Then insert the charging connector of the charger
into the battery charging point. The green LED will
light up. The charger is now on standby.
Please note! If the battery is not connected
properly, the green LED will light up (standby
mode). If the connection is poor, unplug the plug
from the socket and clean the charger's
connector with a dry cloth.
5. The charging time depends on the level of the
battery. The charging time is approximately 2
hours with a 11,4 Ah/36 V battery and
approximately 4.5 hours with a 24,8 Ah/36 V
battery.
6. Once the battery is fully charged, the green LED
will be solid. Now first remove the charging
connector of the charger from the connector of
the battery.
7. Then unplug the charger from the socket.
Version 24.01
2.
3.
20/55
1.
4.
Advertisement
Table of Contents
