Table of Contents
Advertisement
Notifications
Several symbols can be displayed in the information screen. The symbols are explained
below. More information on the notifications can be found in the chapter "Possible
Faults".
The bicycle lights are activated
A Bluetooth connection is active
No communications with the battery
Reverse function of (thumb) throttle is activated
The temperature of the controller is too high
Voltage is too high
Fault
Pedal support power assistance
The Silent electrical system provides assistance while cycling.
Starting aid
With the starting aid, pedal assistance is activated up to a speed of 6 km/h, without
having to pedal yourself. To do this, press and hold down the starting aid button (6). If
the button is pressed again, the function is reactivated.
If you press the starting aid button while cycling, you will get a "boost". This boost will
have the same maximum speed as the bike. The activated pedal assistance mode
determines the degree of assistance of the starting aid and the "boost".
The starting aid button can be used for:
Extra assistance when starting off (starting aid).
•
Extra assistance when cycling uphill (boost).
•
Version 24.01
18/55
Advertisement
Table of Contents
