Table of Contents
Advertisement
Lighting
Normally, the lighting on your bike can be operated manually and set to different modes.
However, if your bike is equipped with the Silent Elektro system, your lighting will
automatically turn off when the electric system is activated. The controls of both the
manually operated and centrally operated lighting is explained below.
Manually operated headlight
The headlight has a button with three different
modes: ON – ON [50%] – OFF
Adjust the angle of the headlight to its correct
position, when the centre of the light beam is
about 10 metres in front of the bicycle.
The headlight is powered by batteries. When the batteries are nearly empty, the LED light
in the button of the headlight will turn red. Follow the steps to change the batteries of the
headlight.
1. Open the headlight by pushing down the tab on the
housing and simultaneously pulling the front of the light
outward like shown.
2. Change the two alkaline batteries (2x AA).
3. Put the light back together by first pushing the top of the
light back into the housing and then pushing the bottom
of the light back over the tab of the housing.
You can only operate the light while your bike is standing still to avoid dangerous
situations and to avoid the chance of entrapment.
Version 24.01
11/55
Advertisement
Table of Contents
