Van Raam Twinny User Manual page 23

Charging the Battery (Twinny, Kivo)
For the best performance and to prolong the
life of the battery, we recommend that you
charge the battery at home at room
temperature.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Pull the handle forward.
3. Take the battery pack from the holder.
4. Take the battery pack inside. First plug
the charger into the socket. The green
LED will light up. The charger is now on
standby.
5. Then insert the charging connector of the charger
into the battery charging point. The green LED will
light up. The charger is now on standby.
Please note! If the battery is not connected
properly, the green LED will light up (standby mode).
If the connection is poor, unplug the plug from the
socket and clean the charger's connector with a dry
cloth.
6. Depending on the battery level, the charging
time is about 2,5 hour with a 13,6 Ah/36 V
battery.
7. Once the battery is fully charged, the green
LED will be solid. Now first remove the
charging connector of the charger from the
connector of the battery.
Version 24.01
1.
2.
4.
3.
5.
23/55