Table of Contents
Advertisement
Manually operated rear light
The rear light has three options which you can choose
by pressing the button repeatedly: On-Auto-Off.
The setting is as follows:
Press 1x: light is on
Press 2x: lighting is automatic
Press 3x: light is off
With the "On" or "Off" mode, the rear light can be manually
switched on and off.
With the "Automatic" mode the rear light automatically
turns on and off with the help of light and movement
sensors. When the bicycle stands still for a while, the light
will automatically turn off.
The rear light works on batteries. When the
batteries are almost empty, a red LED light on
the top starts flashing. To replace the
batteries, follow the next steps.
1.
Dismantle the cover of the holder by
pressing in the lip at the bottom of the
light.
2.
Replace the alkaline batteries
(1,5 V - 1500 mA) and assemble the
cover.
Batteries cause environmental pollution.
Follow the local regulations during disposal.
Version 24.01
1x = ON
2x = AUTO
3x = OFF
1.
2.
12/55
Advertisement
Table of Contents
