Inta Intatherm IT1005CP Installation And Maintenance Instructions Manual page 2

Introduction
This installation guide has been produced for the Intatherm safe touch thermostatic basic mixer
tap. These instructions cover the installation, operation and maintenance. Please read the
enclosed instructions before commencing the installation of this product, please note;
We recommend that the installation of any Inta product is carried out
by an approved installer.
The installation must be carried out strictly in accordance with the Water Supply (Water Fitting)
Regulations 1999 and any local authority regulations.
If in doubt, we would recommend that you contact either your local water authority, the
secretary of the Water Regulations Committee at WRc on Tel: 01495 248454 or Institute of
Plumbing on Tel: 01708 472791.
All products MUST be re-commissioned to suit site conditions to ensure optimum performance
levels of the product are obtained.
Safety
The Intatherm safe touch basin mixer tap contains an integral thermostatic
cartridge to prevent scalding.
This thermostatic mixer tap must be installed and commissioned correctly to ensure that water is
supplied at a safe temperature to suit the users.
43˚C is the maximum mixed water temperature from a mixer tap. The maximum
temperature takes account of the allowable tolerances inherent in thermostatic mixer taps and
temperature losses.
It is not a safe washing temperature for adults or children.
The British Burns Association recommends 37 to 37.5˚C as a comfortable washing temperature
for children. In premises covered by the Care Standard Act 2000, the maximum mixed water
outlet temperature is 43˚C.
Products
Intatherm safe touch basin mixer tap
Intatherm safe touch basin mixer tap with extended lever handle
Check Content
Before commencing remove all components from packaging and check each component with
the contents list.
Ensure all parts are present, before discarding any packaging. If any parts are missing, do not
attempt to install your Inta tap until the missing parts have been obtained.
© Intatec Ltd 2013
1
IT1005CP
IT1006CP