Using Mini-Edge; Adding Background - RGBlink mini-edge Quick Start Manual

Inserting a U Disk
Insert a U disk into the USB port labeled number 1 to
import background sources.
Adding Background Source
Please follow the steps outlined as follows to add
background Source.
1. Rotate ENTER knob to select background source
saved in U disk；
2. Use ENTER knob to move the cursor to "+" , press
ENTER knob again to choose whether to add the
source to Source Selection Area；
3. The operations above also indicate preview
process. The BKG button will be illuminated blue.
Warning: Sources should meet the following requirements:
1. No space and symbols in picture name.
2. jpg, png (32-bit depth) or bmp (24-bit depth); resolution within 1920x1080, subject to the actual output
resolution. Picture size should be consistent with the resolution.
3. Cropping and scaling not supported.
www.rgblink.com

Using mini-edge

Adding Background

How to Enter Background Interface
The user can gain access to Background Interface
through the following methods:
1.
Long press BKG button along the PREVIEW
Outputs Row.
2.
Use ENTER knob to move the cursor to BKG
icon in Sour Selection Area, press ENTER knob
again to enter.
10