Figure 2-5: Piping Layout And Flow Diagram For Standard Model; Figure 2-6: Flow Diagram - Teledyne TEXIO PTE6-200 Operating Instructions Manual

Operational Theory
Cell
Block

Figure 2-5: Piping Layout and Flow Diagram for Standard Model

Figure 2-6 is the flow diagram for the sampling system. In the stan-
dard instrument, calibration gases (zero and span) can be connected di-
rectly to the Sample In port by teeing to the port with appropriate valves.
The shaded portion of the diagram shows the components added when
the –C option is ordered. The valving is installed inside the 3000RS-P-C
enclosure and is regulated by the instrument's internal electronics.
Mems
Flow
Sensor

Figure 2-6: Flow Diagram

Teledyne Analytical Instruments
3000RS-P
Exhaust,
Span,
Sample,
Zero
Solenoid
Valves
14