Table of Contents
Advertisement
Operation
System screen 2:
Pressing Self-Test will initiate the self-test routine as described in
Section 4.2.
4.5.6 Flow Limit
The Flow Limit function allows the user to set or edit the limit on
the gas flow through the analyzer. It also indicates the flow status,
whether the flow alarm is ON or OFF, and the sample flow rate. The
analyzer will be prevented to calibrate if flow is below the limit. Setting
the value to zero will allow calibration regardless of flow value.
The Flow Limit function is available from the second System
screen. To enter this function, press System and scroll to the second
screen.
Teledyne Analytical Instruments
3000RS-P
54
Advertisement
Table of Contents
