Table of Contents
Advertisement
CAUTION:
THIS PRODUCT SHOULD ONLY BE INSTALLED,
COMMISSIONED, AND USED STRICTLY FOR THE
PURPOSE AND IN THE MANNER DESCRIBED IN
THIS MANUAL.
IF YOU IMPROPERLY INSTALL, COMMISSION, OR
USE THIS INSTRUMENT IN ANY MANNER OTHER
THAN INSTRUCTED IN THIS MANUAL OR BY OUR
TECHNICAL SUPPORT TEAM, UNPREDICTABLE
BEHAVIOR COULD RESULT WITH POSSIBLE
HAZARDOUS CONSEQUENCES.
SUCH RISKS, WHETHER DURING INSTALLATION
AND COMMISSION OR CAUSED BY IMPROPER
INSTALLATION/COMMISSIONING/USE, AND THEIR
POSSIBLE HAZARDOUS OUTCOMES INCLUDE BUT
ARE NOT LIMITED TO:
RISK
Liquid or dust/debris ingress
Improper or worn power cable
Excessive pressure from improper
gas bottle connections
Sampling combustible gas(es)
Improper lift & carry techniques
NOTE THAT THE SAFETY OF A SYSTEM THAT MAY INCORPORATE
THIS PRODUCT IS THE END USER'S RESPONSIBILITY.
This manual provides information designed to guide you through
the installation, calibration, and operation of your new analyzer. Please
read this manual and keep it available.
Occasionally, some instruments are customized for a particular
application or features and/or options added per customer requests.
Please check the front of this manual for any additional information in
the form of an Addendum which discusses specific information,
procedures, cautions and warnings that may be peculiar to your
instrument.
Manuals do get lost. Additional manuals can be obtained from
Teledyne at the address given in the Appendix. Some of our manuals are
available in electronic form via the internet. Please visit our website at:
www.teledyne-ai.com.
Teledyne Analytical Instruments
HAZARD
Electrical shock hazard
Electrical shock or fire hazard
Explosion and projectile hazard
Explosion and fire hazard
Personal injury
3000RS-P
vi
Advertisement
Table of Contents
