Table of Contents
Advertisement
6
6.1
6.1.1
Satellite reception
Instrument channels
Supported signals
☞
6.1.2
☞
Differential code
Differential phase in
post-processing
52
Technical Data
GS18 Technical Data
Tracking Characteristics
Multi-frequency
☞
Depending on the satellite systems and signals configured, a max-
imum number of 555 channels is allocated.
System
GPS
GLONASS
Galileo
BeiDou
QZSS
NavIC
SBAS
(WAAS, EGNOS, MSAS, GAGAN)
Terrastar
*
QZSS L6 and SBAS L5 will be provided through future firmware
upgrade.
Support of NavIC is incorporated and will be provided through future
firmware upgrade.
Carrier phase and code measurements on L1, L2 and L5 (GPS) are fully inde-
pendent with AS on or off.
Accuracy
Accuracy is dependent upon various factors including the number of satellites
tracked, constellation geometry, observation time, ephemeris accuracy, iono-
spheric disturbance, multipath and resolved ambiguities.
The following accuracies, given as root mean square, are based on measure-
ments processed using Leica Infinity and on real-time measurements.
The use of multiple GNSS systems can increase accuracy by up to 30% relative
to GPS only.
The baseline precision of a differential code solution for static and kinematic
surveys is 25 cm.
Type
Static and rapid static
Kinematic
Signal
L1, L2, L2C, L5
L1, L2, L2C, L3
E1, E5a, E5b, AltBOC, E6
B1I, B1C, B2I, B2A, B3I
L1, L2C, L5, L6
*
L5
L1, L5*
L-band
Horizontal
3 mm + 0.5 ppm
8 mm + 1 ppm
*
Vertical
5 mm + 0.5 ppm
15 mm + 1 ppm
Technical Data
Advertisement
Table of Contents
