Leica GS18 User Manual page 44

Measuring in images
step-by-step
44
Action
Capturing time
The value indicates how much
time has passed since the cap-
turing of images was started.
The capturing time is limited to
60 seconds.
Number of images
The value indicates the number
of images that were captured
within the image group
3. Image group quality
The value indicates the expected
quality of a point measurement
inside the image group
Action
At least one image group must
☞
be stored within the active job.
1. Leica Captivate - Home: GS
imaging\Measure in images.
2. Select an image group.
3. Pick a characteristic point in the
image.
The picked point will be marked
with the symbol
The snapping tool option can be
☞
used to automatically snap the
point to the closest corner point.
4. Measure
For editing a measurement
If an image was used for the cal-
☞
culation of the 3D coordinates of
the picked point, the symbol
will appear in the selected image.
Result
The capturing time increases
constantly during the capturing.
After 60 seconds, the capturing
stops automatically.
The number of images will be
shown after the capturing is
stopped.
The quality will be shown after
the capturing is stopped.
Result
in the image.
Operation