Leica GS18 User Manual page 43

Diagram
Capturing an image
group step-by-step
Operation
No need to measure each point individually with the pole tip of the GS
•
sensor
No need to physically access the points
•
Capture images of the areas with weak or no satellite signal
•
a
19946_001
b
a GNSS signal
b Position of captured image i
c Position of captured image i+1
d Position of captured image i+2
GS18 I is ready to capture an image group when all of the following
☞
conditions are fullfilled:
The GS18 I must be configured as real-time rover and connec-
•
ted to a CS20 LTE, CS20 BASIC, CS30 or CS35 via cable or
WLAN.
The live video stream is visible.
•
The tilt compensation is initialised.
•
The 3D coordinate quality value is better than 10 cm.
•
Action
1. Leica Captivate - Home: GS
imaging\Capture image group
2. Start
Walk along the object of interest
while the camera is directed
toward the left or the right side
in respect to the user.
Stop
Wait until the image processing
has been finished.
Store
c
Result
d
43