- / : communication port.
- : it disables any type of communication (default).
- : MODBUS-RTU protocol; possible addresses: from 1 to 99 (see Communication
protocols manual).
- : ASCII bidirectional protocol; possible addresses: from 1 to 99 (see
Communication protocols manual).
-
-
- : continuous weight transmission protocol (see Communication protocols
manual), at the frequency set in item (from 10 to 300).
- (set: = , = ).
- (set: = , = ).
- : continuous weight transmission protocol to RIP5/20/60, RIP50SHA, RIPLED series
remote displays; the remote display shows the net weight or gross weight according to its
settings (set: = , = , = ).
- : continuous weight transmission protocol to RIP675, RIP6125C series remote
displays; the remote display shows the net weight or gross weight according to its settings
(set: = , = , = ).
- : continuous weight transmission protocol to RIP675, RIP6125C series remote
displays (set: = , = , = ).
When ther remote display is set to gross weight:
- if the instrument displays the gross weight, the remote display shows the gross
weight.
- if the instrument shows the net weight, the remote display shows the net weight
alternated with the message .
- : printer.
- : transmission speed (2400, 4800, 9600, 19200, 38400, 115200; default:
9600).
- : instrument address (da 1 a 99; default: 1).
- : maximum transmission frequency (10 – 20 – 30 – 40 – 50 – 60 – 70 – 80
– 100 – 200 – 300; default: 10); o be set when the transmission protocol
is selected.
Maximum setting frequency ():
- 20 Hz with minimum baud rate 2400 baud.
- 40 Hz with minimum baud rate 4800 baud.
- 80 Hz with minimum baud rate 9600 baud.
- 100 Hz with minimum baud rate 19200 baud.
- 200 Hz with minimum baud rate 38400 baud.
- 300 Hz with minimum baud rate 38400 baud.
SERIAL COMMUNICATION SETTING
- 31 -