Through this procedure, it's possible to block the access to any menu on the instrument.
Select the menu that you wish to lock:
(the left point on the text indicates that this menu item is now locked). If the operator tries
to enter this menu, the access is denied and the display shows
(the left point on the text is off to indicate that this menu item is unlocked).
enter and modify all menus including those which are locked. By returning to weight display, the
menu lock is restored.
WARNING: operations must only be performed after contacting technical assistance.
After each operation the display shows , press ENTER to continue.
By pressing ESC the procedure is cancelled and no changes are made.
Upon instrument power-on hold down the ESC key until the display shows , then proceed as
follows:
CONSTANTS RESTORE (does not erase the calibration): confirm , use arrow keys to select
, set code 6935 and confirm.
RESERVED FOR THE INSTALLER
MENU LOCKING
press ESC and ◄ simultaneously for 3 seconds, the display shows
MENU UNLOCKING
press ENTER and ▲ simultaneously for 3 seconds, the display shows
TEMPORARY MENU UNLOCKING
press ▲ and ◄ simultaneously for 3 seconds: it is now possible to
DATA DELETION AND PROGRAM SELECTION
- 45 -
.