Test; Energy Saving - LAUMAS WTAB-R Installation And User Manual

- Input Test:
: ensure that for each open input is displayed,  is displayed when the input is closed.
- Output Test:
: setting  ensure that the corresponding output opens. Setting  ensure that the
corresponding output closes.
- E/EC Option Test:
: It shows the group number of setpoint selected by the E/EC option, if the option is not
present or is not active, the message  is displayed.
- Analog Output Option Test:
: It allows the analog signal to range between the minimum and the maximum values
starting from the minimum.
: current output test.
: voltage output test.
- Millivolt Test:
: displays the load cell response signal in mV with four decimals.
- : display always on;
- : the display enters energy saving mode after about one minute of no activity; pressing a
key or a weight change turns normal operations on again.
- : back-lighting on;
- : back-lighting off;
- : back-lighting goes off after about one minute of no activity; pressing a key or a weight
change turns it on again.
- : the integrated printer is always on;
- : the integrated printer automatically turns on when printing.

TEST

ENERGY SAVING

WDESK-R, WINOX-R, WTAB-R
WDESK-L, WINOX-L, WINOX-2L, WTAB-L
WTAB
- 34 -