Serial Communication Setting - LAUMAS TLU Installation And User Manual

For example:
 = 10000
Weight = 0 kg
Weight = 5000 kg
Weight =10000 kg
-  / : communication port.
- : it disables any type of communication (default).
- : MODBUS-RTU protocol; possible addresses: from 1 to 99 (see Communication
protocols).
- : ASCII bidirectional protocol; possible addresses: from 1 to 99 (see
Communication protocols).
- : continuous weight transmission protocol to RIP5/20/60, RIP50SHA, RIPLED series
remote displays; the remote display shows the net weight or gross weight according to its
settings (set:  = ,  = ,  = ).
- : continuous weight transmission protocol to RIP6100, RIP675, RIP6125C series
remote displays; the remote display shows the net weight or gross weight according to its
settings (set:  = ,  = ,  = ).
- : continuous weight transmission protocol to RIP6100, RIP675, RIP6125C series
remote displays (set:  = ,  = ,  = ).
  When ther remote display is set to gross weight:
- if the instrument displays the gross weight, the remote display shows the gross
weight.
- if the instrument shows the net weight, the remote display shows the net weight
alternated with the message .
- : transmission speed (2400, 4800, 9600, 19200, 38400, 115200; default:
9600).
- : instrument address (da 1 a 99; default: 1).
- : delay in milliseconds which elapses before the instrument replies (from 0
to 200 ms; default: 0).
- :
- : stop bit (1 – 2; default: 1).
 = 0 analog output 0÷10 V
analog output =
analog output =
analog output =

SERIAL COMMUNICATION SETTING

- : no parity (default).
- : even parity.
- : odd parity.
10 V
5 V
0 V
- 17 -