585 Presence Detector On Single Door Opening - Assa Abloy NORTON RIXSON 6000 Series Programming Instructions Manual

6000 Series Programming Instructions
y The door is normally closed.
y Activating the switch will open door.
y The door will close after the hold open time delay has
elapsed.
y If the door is closed and the 585 Presence Detector
senses something in the opening, the door will not
open when activated.
y If the door is at an open position and the 585 Presence
Detector senses something in the opening, the door
will not close after the hold open time delay has
elapsed.
y Once the opening is clear, the door will close after the
hold open time delay has elapsed again.
For Low Energy Operators, Presence Detectors and/or
sensors CANNOT be used to activate an opening cycle
of the door.
To activate the presence detector functionality:
y Use the instructions provided with the 585 sensor to
program and make any necessary adjustments to the
sensor.
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1043-020 Rev 2 10/23

585 Presence Detector on Single Door Opening

Pre-Wired
585 Presence
Detector
585 Presence Detector
mounted to / above frame
(on single opening)
31