Wave To Open - Assa Abloy NORTON RIXSON 6000 Series Programming Instructions Manual

6000 Series Programming Instructions
Power +
Power –
N/O
N/C
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1043-020 Rev 2 10/23
(change factory pre-wiring to illustration below - move NO to +24 on controller)

Wave to Open

C
Wave to Open
Wave to Open Switch Detail
LED Setting:
Jumper in place:
LED is Red and
flashes Green when
relay is active.
Time Delay Setting:
1 Sec 5 Sec 10 Sec
No Jumper:
LED is Green and
flashes Red when
relay is active.
15 Sec 20 Sec 25 Sec 30 Sec
Alternate 24V
Source
(+V and -V of
Power Supply)
35 Sec
19