24Vdc Fail Secure Electric Strike Or Electric Exit Device - Assa Abloy NORTON RIXSON 6000 Series Programming Instructions Manual

6000 Series Programming Instructions
Exit Device 24VDC
OR
Electric Strike 24VDC
y The door is normally closed and
latched.
y Activating the switch will unlock the
electric strike or exit device and the
door will automatically open. The
door will close after hold open time
delay has expired.
y The door will remain locked during
power failure.
y Activation can be via a wall switch,
card reader, key switch, etc (Normally
open momentary dry contacts).
y To turn on the relay (Relay 2),
Latch Retraction (Refer to Output
Connections on page 12) and/or
Open Delay (Refer to Setup options
on page 8), each feature must
be turned on using adjustment
procedures.
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1043-020 Rev 2 10/23

24VDC Fail Secure Electric Strike or Electric Exit Device

Pre-Wired
21