24Vdc Fail Safe Electric Strike Or Electromagnetic Lock - Assa Abloy NORTON RIXSON 6000 Series Programming Instructions Manual

(change factory pre-wiring to illustration below - move NO to NC on controller)
+
–
Electromagnetic
Lock
OR
+
–
Electric Strike 24VDC
y The door is normally closed and latched.
y Activating the switch will unlock the electric strike or mag
lock and the door will open automatically. The door will
close after the hold open time delay has expired.
y The door will remain unlocked during a power failure.
22

24VDC Fail Safe Electric Strike or Electromagnetic Lock

Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part
6000 Series Programming Instructions
y Activation can be a wall switch, card reader, key switch,
etc (Normally open momentary dry contacts).
y Current draw at the Power Outputs not to exceed 1.3A.
y To turn on the relay (Relay 2), Latch Retraction (Refer to
Output Connections on page 12) and/or Open Delay
(Refer to Setup options on page 8), each feature
must be turned on using adjustment procedures.
without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Pre-Wired
80-9360-1043-020 Rev 2 10/23