Glass Door Micro-Switch Lever; Level Sensor And Condensation Water Pump; Level Sensor - Electrolux 599 76 86-51 Service Manual

Condensation tumble dryer with heat pump and steam generator

Table of Contents

7.9.3

Glass door micro-switch lever

• To remove the door micro-switch lever, press the

fastening clip.

• Push the lever in the direction shown by the

arrow until you have removed it completely.

• Insert the lever as far as it can go to re-assemble

it so that the fastening clips block it

• Loosen the screws that hold on the level sensor

compartment lid and pump.

• Unhook the fastening clip.

• Remove the protection.

7.10.1

• Detach the connector and remove it.

• Slightly move the locking hooks indicated by the

arrows and remove the level sensor by pulling it

upwards.

Technical Support - A.D.L.

37/69

599 76 86-51 Rev. 01

Table of Contents