Table of Contents
Advertisement
1.2 Installation
Remove the external film. If necessary use a cutter
blade
Take off the cardboard cover and remove the corner
elements.
Remove the polystyrene base and set the tumble
dryer in position.
The tumble dryer weighs approximately 60 kg
Adjust the four feet so that the appliance is installed
perfectly level (using a spirit level), to allow for the
correct flow of condensation water into the purpose-
provided tank.
The feet must never be removed. A gap must always
be left between the bottom of the tumble dryer and
the floor to prevent the appliance from overheating.
Technical Support - A.D.L.
6/69
599 76 86-51 Rev. 01
Advertisement
Table of Contents
