9.2 The LEDs do not light up after the buttons are pressed
Are the buttons unobstructed and do
they activate the various options
correctly?
Y
E
S
When the buttons are pressed, the
cycle options are acquired.
Y
E
S
Appliance OK, run the diagnostics
programme
Important!
You cannot access the diagnostics system if the main circuit board has not been configured correctly:
configuration errors E93 E94 are displayed by the flashing of all LEDs.
Technical Support - A.D.L.
Fix the mechanical problems
NO
(control panel - keys - supports - pin).
Change the main circuit board and run
NO
the diagnostics programme.
63/69
599 76 86-51 Rev. 01