Advertisement
The POC device supports hot-swap battery pack operation. Through hot-swapping, a
user can hotplug install two battery packs. This chapter describes how to install a bat-
tery.
12.1
Installing the Hot-Swap Battery Pack
1. Open the battery door:
Users can access the battery slot using the arrowhead buttons (circled in red below).
1) Press the arrowhead button.
2) Pull open the door to access the battery slot.
Caution! We recommend holding the battery with both hands when inserting it
into the POC-624-02 power system.
POC-624-02 Series User Manual
62
Advertisement
