Plastic Grocery Bag Retainers - If Equipped; Head Restraints - RAM 1500 2025 Owner's Manual

36 GETTING TO KNOW YOUR VEHICLE
●
Press the ventilated seat button a second time to
choose MED.
●
Press the ventilated seat button a third time to
choose LO.
●
Press the ventilated seat button a fourth time to turn
the ventilation off.
NOTE:
The engine must be running for the ventilated seats to
operate.
For information on use with the Remote Start system,
ð
see page 23.
Rear Ventilated Seats — If Equipped
If equipped, the two outboard rear seats will
have ventilated seats. The rear ventilated
seat control switches are located on the
rear of the center console.
The fans operate at three speeds: HI, MED, and LO.
Push the ventilated seat buttons to toggle through the
speeds, or to turn the feature off.
NOTE:
The engine must be running for the ventilated seats to
operate.
P G B R
LASTIC ROCERY AG ETAINERS
E
QUIPPED
Retainer hooks which will hold plastic grocery bag
handles are attached to the underside of the rear
seat cushion. To access these hooks, lift the rear seat
cushion upward.
H R
EAD ESTRAINTS
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rear
impact. Head restraints should be adjusted so that the
top of the head restraint is located above the top of
your ear.
●
All occupants, including the driver, should not
operate a vehicle or sit in a vehicle's seat until the
head restraints are placed in their proper positions
in order to minimize the risk of neck injury in the
event of a crash.
●
Head restraints should never be adjusted while
the vehicle is in motion. Driving a vehicle with the
head restraints improperly adjusted or removed
could cause serious injury or death in the event of
a collision.
NOTE:
Do not reverse the head restraints (making the rear of
the head restraint face forward) in an attempt to gain
additional clearance to the back of your head.
Front Head Restraints
— I
F
Your vehicle is equipped with one of two available front
four-way driver and passenger head restraints.
Four-Way Head Restraints With Bottom Adjustment
Button
To raise the head restraint, pull upward on the
head restraint. To lower the head restraint, push the
adjustment button, located at the base of the head
restraint, and push downward on the head restraint.
WARNING!
NOTE:
The head restraints should only be removed by qualified
technicians, for service purposes only. If either of the
head restraints require removal, see an authorized
dealer.
Head Restraint Adjustment Button Location
To adjust the head restraint forward, pull the top of the
head restraint toward the front of the vehicle as desired
and release. To adjust the head restraint rearward,
pull the top of the head restraint to the forward most
position and release. The head restraint will return to
the rear most position.