Traffic Sign Assist System - If; Equipped; Activation/Deactivation; Traffic Sign Assist Modes - RAM 1500 2025 Owner's Manual

Lane Changing Example
NARROW VEHICLES
Some narrow vehicles traveling near the outer edges of
the lane or edging into the lane are not detected until
they have moved fully into the lane. There may not be
sufficient distance to the vehicle ahead.
Narrow Vehicle Example
STATIONARY OBJECTS AND VEHICLES
ACC does not react to stationary objects or vehicles.
For example, ACC will not react in situations where
the vehicle you are following exits your lane and the
vehicle ahead is stopped in your lane. It will consider
this stopped vehicle a stationary object as it did not
previously detect movement from it. Always be attentive
and ready to apply the brakes if necessary.
Stationary Object And Stationary Vehicle Example
TRAFFIC SIGN ASSIST SYSTEM — IF

EQUIPPED

The Traffic Sign Assist (TSA) system uses a camera
mounted on the windshield, as well as map data
when the vehicle is equipped with Navigation, to detect
recognizable road signs such as:
●
Speed limits
●
School zones
●
No passing zones
STARTING AND OPERATING
NOTE:
●
The TSA system will automatically display the
detected road sign using the unit of measurement
(mph or km/h) selected within Uconnect Settings, or
within the instrument cluster display.
●
If no speed limit signs are detected, the system will
revert to the speed limit signs that are stored in the
Navigation system.
●
The system always checks the traffic signs indicating
the current speed limit. The system is able to
recognize and display up to two different road signs
in the instrument cluster display. These road signs
can be found on the Driver Assist page.
A /D
CTIVATION EACTIVATION
The TSA System can be enabled/disabled within the
Uconnect system through the Safety/Driver Assistance
menu. System ON is signaled by road signs shown on
the instrument cluster display.
NOTE:
Even if the system is OFF, the speed limit sign will
be displayed when the driver selects it in the HOME
screen.
T S A M
RAFFIC IGN SSIST ODES
TSA has three selectable modes of operation that are
available through the Uconnect system
Visual
When Visual is selected, the system will alert the
driver when the current speed of the vehicle exceeds
the detected speed limit by showing a graphic in the
instrument cluster display.
151
4
ð
page 203.