Steering Wheel Audio Controls; Radio Operation; Media Mode; Passenger Screen - If Equipped - RAM 1500 2025 Owner's Manual

Table of Contents

Advertisement

STEERING WHEEL AUDIO CONTROLS

The remote sound system controls are located on the
rear surface of the steering wheel at the three and nine
o'clock positions.
Remote Sound System Controls
The right-hand control is a rocker-type switch with a
push button in the center and controls the volume and
mode of the sound system. Pushing the top of the
rocker switch will increase the volume, and pushing the
bottom of the rocker switch will decrease the volume.
Pushing the right-hand control's center button will make
the radio switch between the various modes available
(AM/FM/SXM or Media, etc.).
The left-hand control is a rocker-type switch with a
push button in the center. The function of the left-hand
control is different depending on which mode you are
in.
The following describes the left-hand control operation
in each mode:
R
O
ADIO
PERATION
Pushing the top of the switch will seek up for the next
available station and pushing the bottom of the switch
will seek down for the next available station.
The button located in the center of the left-hand control
will tune to the next preset station that you have
programmed in the radio presets.
M
M
EDIA
ODE
Pushing the top of the switch skips to the next track
on the selected media (AUX/USB/Bluetooth®). Pushing
the switch up twice will go forward two tracks. Pushing
the bottom switch goes to the beginning of the current
track, or the beginning of the previous track if it is
within eight seconds after the current track begins to
play. Double pressing the bottom button switch will skip
to the previous track if it is after eight seconds into the
current track.
PASSENGER SCREEN — IF EQUIPPED
Your vehicle may be equipped with a Passenger Screen
located above the glove compartment on the passenger
side of the vehicle. From the Passenger Screen, you
will be able to access similar features seen within the
Uconnect radio, such as media functions, Navigation,
and device management.
To begin using the Passenger Screen, push the Power
button to the left of the Passenger Screen display, or
press the Power button under the Controls tab within
the Uconnect system. The Passenger Screen can be
turned off by accessing the Control screen and pressing
the Power Off button.
MULTIMEDIA
You must link Bluetooth® headphones to the Passenger
Screen to begin listening to the system's audio
page
226.
NOTE:
The Passenger Screen will need to be turned On each
time the vehicle is started, and the system will display
the Home screen upon boot up.
P
S
P
ASSENGER
CREEN
ERMISSIONS
Through the Uconnect system, features within the
Passenger Screen can be activated and deactivated
through Passenger Screen Permissions. To access
Permissions, press the Vehicle button in the Menu Bar
and select the Settings tab. Then, press the Passenger
Screen Settings menu. Press the On button for the
Passenger Screen Permissions setting to activate
Permissions.
Passenger Screen Permissions Settings Menu
By default, the Passenger Screen Permissions setting is
set to "Off", and the driver will need to give permission
for the different features.
223
ð
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents