Climate Controls; Automatic Climate Control Descriptions And Functions - RAM 1500 2025 Owner's Manual

58 GETTING TO KNOW YOUR VEHICLE
●
The Rain Sensing feature may not function properly
when ice, or dried salt water is present on the
windshield.
●
Use of products containing wax or silicone may
reduce Rain Sensing performance.
●
The Rain Sensing feature can be turned on and off
ð
using the Uconnect system page
The Rain Sensing system has protection features for the
wiper blades and arms, and will not operate under the
following conditions:
●
Low Ambient Temperature — When the ignition is
first placed in the ON position, the Rain Sensing
system will not operate until the wiper switch is
moved, vehicle speed is greater than 3 mph (5
km/h), or the outside temperature is greater than
32°F (0°C).
●
Transmission In NEUTRAL Position — When the
ignition is ON, and the automatic transmission is in
the NEUTRAL position, the Rain Sensing system will
not operate until the wiper switch is moved, vehicle
speed is greater than 3 mph (5 km/h), or the gear
selector is moved out of the NEUTRAL position.
●
Remote Start Mode Inhibit — On vehicles equipped
with a Remote Start system, Rain Sensing wipers are
not operational when the vehicle is in the Remote
Start mode.

CLIMATE CONTROLS

The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen, on the sides of the touchscreen, or on the
instrument panel below the radio.
A C
UTOMATIC LIMATE
A F
ND UNCTIONS
203.
Uconnect 5 or 5 NAV With 8.4-
inch Display Automatic Temperature Controls
Uconnect 5 NAV With 12-inch
Display Automatic Temperature Controls
C D
ONTROL ESCRIPTIONS
NOTE:
Icons and descriptions can vary based upon vehicle
equipment.
MAX A/C Button
on. Pressing the button again will cause the MAX A/C
operation to exit.
NOTE:
●
●
Uconnect 5 NAV With 14.5-inch
Display Automatic Temperature Controls
Press and release the MAX A/C button
on the touchscreen to change the current
setting to the coldest output of air. The MAX
A/C indicator illuminates when MAX A/C is
MAX A/C sets the control for maximum cooling
performance.
The MAX A/C button is only available on the
touchscreen.