Table of Contents
Advertisement
SERVICE PROCEDURE
CLEAN TRANSMISSION CASE STRAINER
The parts and oil are at high temperature immediately after the engine is stopped, and may cause burns. Wait for the
temperature to go down before starting the work.
When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it.
Drain the oil from the transmission case before starting the operation. For details, see Section "CHANGE OIL IN
TRANSMISSION CASE (PAGE 4-63)".
1. Remove bolt (1), then remove cover (2) and take out the
strainer.
2. Remove any dirt stuck to the strainer, then wash in clean diesel
fuel or flushing oil. If the strainer is damaged, replace it.
3. Install the strainers in their original position.
CLEAN BREATHER
The parts and oil are at high temperature after the engine is stopped, and may cause serious burns. Wait for the temperature
to go down before cleaning the engine breather.
When using compressed air, there is a hazard that dirt may be blown up and cause serious injury.
Always use safety glasses, dust mask, or other protective equipment.
Remove the mud and dirt from around the breather, then remove the breather and wash out the dirt from inside with
clean diesel oil or flushing oil.
Transmission
4 - 74
WARNING
WARNING
https://www.besttruckmanuals.com/
MAINTENANCE
Advertisement
Chapters
Table of Contents
