Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
METHOD OF PRESET
1. Select the desired preset station.
Use the "BAND" button to select MW (AM) or FM, and use the
"TUNE" button to select the frequency of the broadcasting
station.
2. Decide the number of the button to be preset, and keep it
pressed for 2 seconds. The number of the button will be
displayed and the presetting is completed.
3. Repeat Steps 1 to 2 to preset other broadcasting stations.
To change the setting of a preset switch to another station,
repeat Steps 1 to 2.
If the battery is replaced or the power is switched off, all the
preset settings are deleted. Carry out the presetting
operation again.
It is possible to preset 6 AM (MW) stations and 6 FM
stations.
METHOD OF AUTOMATIC MEMORY
If the "AST" button is pressed for 2 seconds, the broadcasting
stations that can be received in the area are called up in turn, and
the broadcasting stations are automatically saved in the preset
memory.
AUTOMATIC SWITCHING RECEPTION OF MONAURAL/STEREO
If the reception of the FM stereo broadcast being received is weak (when you are far from the broadcasting station
or are surrounded by hills), the radio is automatically switched from stereo to monaural to reduce the interference.
When the stereo broadcast becomes stronger, it automatically switches back to stereo broadcasting.
3 - 54
https://www.besttruckmanuals.com/
OPERATION
Advertisement
Chapters
Table of Contents
