Table of Contents
Advertisement
MAINTENANCE
EVERY 250 HOURS SERVICE
Maintenance for every 50 hours service should be carried out at the same time.
LUBRICATION
1. Stop the engine.
2. Using a grease pump, pump in grease through the grease fittings shown by arrows.
3. Check visually that the greasing has been carried out properly.
4. After greasing, wipe off any old grease that was pushed out.
Carry out the greasing operation every day when operating in places where the grease flows out easily, such as
when traveling through mud or water.
(1) Steering cylinder (left) (2 places)
(2) Steering cylinder (right) (2 places)
(3) Hoist cylinder (left and right: 2 places each)
https://www.besttruckmanuals.com/
SERVICE PROCEDURE
4 - 41
Advertisement
Chapters
Table of Contents
