Table of Contents
Advertisement
OPERATION
ADJUST SEAT BELT
Before fastening the seat belt, check that there is no problem in the securing brackets or belt. If there is any wear or damage,
replace.
Even if there appears to be no problem in the seat belt, replace the seat belt once every 3 years. The date of manufacture is
woven on the reverse side of the belt.
Adjust and fasten the seatbelt before starting to travel.
Always use the seatbelt when traveling.
Do not use the seat belt with either half of the belt twisted.
Fastening and removing belt
Fasten the belt so that it is tight without being too tight.
1. Sit on the seat, depress the brake pedal fully, and adjust the
seat so that your back is pressed against the backrest.
2. Sit in the seat, pull the right side of the belt, then insert tongue
(1) into buckle (2) until a click is heard.
3. When removing the belt, press the red button in buckle (2) to
free the belt.
Fit the belt so that it follows your body and is not twisted.
ADJUST STEERING WHEEL TILT
Always stop the machine before adjusting the tilt of the steering wheel.
The tilt of the steering wheel can be adjusted to the front and rear,
and up and down. Pull lever up and set the steering wheel to the
desired position, then push lever down to lock the steering wheel
securely in position.
Amount of adjustment: Front/rear: 80 mm/80 mm (3.2 in/3.2 in)
(from center of steering wheel)
Up: 33 mm (1.3 in)
Down: 17 mm (0.7 in)
3 - 82
WARNING
WARNING
https://www.besttruckmanuals.com/
OPERATION
Advertisement
Chapters
Table of Contents
