Table of Contents
Advertisement
OPERATION
OPERATIONS, CHECKS BEFORE STARTING
When starting the engine, check that the shift lever is set in the N
(neutral) position and that the parking brake switch is at PARKING
position.
Before standing up from the operator's seat, place the shift lever at N
(neutral) position, and set the parking brake switch to the PARKING
position.
1. Check that parking brake switch (1) is in the PARKING
position.
2. Check that gear shift lever (2) is at the N position.
REMARK
If the starting switch is turned to the ON position when the shift
lever is not at the N position, the shift lever position pilot lamp and
central warning lamp will flash, and the alarm buzzer will sound.
3. Check that dump lever (3) is at the HOLD position.
4. Check that there is no abnormality in the machine monitor
when starting switch (4) is turned to the ON position.
3 - 84
WARNING
https://www.besttruckmanuals.com/
OPERATION
Advertisement
Chapters
Table of Contents
