Recover Oil Leaking From Floating Seal - Komatsu ecot3 GALEO HM300-2 Operation And Maintenance Manual

SERVICE PROCEDURE

RECOVER OIL LEAKING FROM FLOATING SEAL

There are 4 oil suction openings. Collect all oil with the hand pump
attached to the machine.
REMARK
If oil is flowing out of the overflow hose, collect the oil, even if before
500 hours.
1. Remove the cap of an oil suction opening.
2. Connect the coupler (female) of the attached hand pump to the coupler (male) of the suction opening.
3. Put the oil outlet hose of the hand pump in the oil receiving container.
4. Operate the hand pump at least 10 times to pump up the oil.
Front axle (left)
Front axle (right)
4 - 58
https://www.besttruckmanuals.com/
MAINTENANCE