Table of Contents
Advertisement
OPERATION
WHEN USING CRANE
1. Remove lock bolt (2) from guard (1) at the rear of the cab, then
lock guard (1) in position with rod (3).
2. Remove pin (4) in the mount at the rear of the cab, and insert
it in hole (6).
3. Remove cab mounting bolts (7) (8 pieces).
4. Install the sling to hooks (8) installed to the front of the cab (on
both right and left sides) and lift up the cab.
5. After tilting up the cab, fix it with lock bar (9).
6. Make sure that lock bar (9) is installed in the correct direction
and lock it securely with lock (10).
7. After returning the cab to its original position, insert pin (4) in
hole (5).
3 - 108
https://www.besttruckmanuals.com/
OPERATION
Advertisement
Chapters
Table of Contents
