Table of Contents
Advertisement
OPERATION
WHEN USING TILT CYLINDER
(If equipped)
1. Remove lock bolt (2) from guard (1) at the rear of the cab, then
lock guard (1) in position with rod (3).
2. Remove pin (4) in the mount at the rear of the cab, and insert
it in hole (6).
3. Remove the cab mounting bolts (8 pieces).
4. Apply hydraulic pressure (20.6 to 34.3 MPa (210 to 350 kg/cm
2
, 2980 to 4970 PSI) to hose (7) behind the front right wheel and
raise the cab.
5. After tilting up, fixed the cab in position with lock bar (8).
6. Make sure that lock bar (8) is installed in the correct direction
and lock it securely with lock (9).
7. After returning the cab to its original position, insert pin (4) in
hole (5).
https://www.besttruckmanuals.com/
OPERATION
3 - 109
Advertisement
Chapters
Table of Contents
