Table of Contents
Advertisement
SERVICE PROCEDURE
EVERY 50 HOURS SERVICE
LUBRICATION
1. Stop the engine.
2. Use the grease pump to pump in grease through the grease fitting marked by the arrow.
3. Check visually that the greasing has been carried out properly.
4. After greasing, wipe off any old grease that was pushed out.
Carry out the greasing operation every day when operating in places where the grease flows out easily, such as
when traveling through mud or water.
(1) Front suspension (left) (2 places)
(2) Front suspension (right) (2 places)
(3) Rear suspension (left and right: 2 places each)
4 - 40
https://www.besttruckmanuals.com/
MAINTENANCE
Advertisement
Chapters
Table of Contents
