Check Accumulator Gas Pressure; Check Alternator; Check, Adjust Engine Valve Clearance; Check Vibration Damper - Komatsu ecot3 GALEO HM300-2 Operation And Maintenance Manual

SERVICE PROCEDURE SERVICE PROCEDURE
Final drive case (front, right)
Final drive case (canter)

CHECK ACCUMULATOR GAS PRESSURE

Please contact your Komatsu distributor to have the gas pressure checked when making periodically replacement
of safety parts or carrying out the legally required 2000 hour or every year service.

CHECK ALTERNATOR

There is the possibility that the brush has worn out, or the bearing has run short of grease, so call on your Komatsu
distributor for an inspection or repairs.

CHECK, ADJUST ENGINE VALVE CLEARANCE

Special tools are needed for inspection and maintenance, so contact your Komatsu distributor.

CHECK VIBRATION DAMPER

Check that there are no cracks or peeling in the outside surface of the rubber.
If any cracks or peeling are found, contact your Komatsu distributor to have the parts replaced.
4 - 76
https://www.besttruckmanuals.com/
MAINTENANCE MAINTENANCE