Use Of Rear View Monitor; Name And Functon Of Each Part Of Rear View Monitor - Komatsu ecot3 GALEO HM300-2 Operation And Maintenance Manual

USE OF REAR VIEW MONITOR

USE OF REAR VIEW MONITOR
Never operate any of the switches while in running. If you do so, there is the fear that you may make an error in the truck
operation, or neglect to watch the hauling road ahead for safety, and as a result cause a serious personal injury.
The rear view monitor is an aid for checking obstacles in the rear. An image appearing on the monitor is limited. So when
backing up the dump truck, be sure to make a visual check, not relying solely on the monitor.
An image on the rear view monitor does not show an actual distance, so drive the dump truck slowly, when backing it up.
When the dump truck is backed up and the rear view monitor is set in operation, a monitor display enables the driver
to check the rear for safety.

NAME AND FUNCTON OF EACH PART OF REAR VIEW MONITOR

(1) Auto Switch
(2) Manual Switch
(3) Zoom / Iris Switch (Reverse Light Compensation
Switch)
AUTO SWITCH
When an image of a camera is shown on the monitor display and
this switch (1) is pressed, the camera image disappears and the
display turns into a waiting condition.
When the gearshift lever is put into the "R" position while the
display is in the waiting condition, an image of the rear view
automatically appears.
6 - 4
WARNING
https://www.besttruckmanuals.com/
(4) Bright / Dim Light Selector Switch
(5) Mark Switch (not operable with this machine)
(6) Contrast Adjustment Knob
(7) Brightness Adjustment Knob
ATTACHMENTS, OPTIONS