Table of Contents
Advertisement
SERVICE PROCEDURE
CLEAN HYDRAULIC TANK STRAINER
The parts and oil are at high temperature immediately after the engine is stopped, and may cause burns. Wait for the
temperature to go down before starting the work.
When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it.
1. Raise the front side of the cab. For details, see "CAB TILT OPERATION (PAGE 3-107)".
2. Turn the cap of oil filler (F) to release the internal pressure
before removing the cap.
3. Remove cap (1) of the hydraulic tank strainer and clean the
strainer and strainer case.
4. After checking and cleaning, set the strainer in the case and
tighten cap (1).
5. Install the cap of oil filler (F).
4 - 38
WARNING
https://www.besttruckmanuals.com/
MAINTENANCE
Advertisement
Chapters
Table of Contents
