Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
INPUT METHOD FOR TELEPHONE NUMBER
When an error for action code "E03" occurs, it is possible to display the telephone number.
1. Press the ( ) of machine monitor mode selector switch 1 and display the reverse travel odometer.
2. Press (>) or (<) of machine monitor mode selector switch 2 and
display "TEL".
3. Press ( ) of machine monitor mode selector switch 1. It will
change to the display in the diagram on the right.
Once the telephone number is input, the input number will be
displayed next time.
4. Up to 12 digits can be displayed for the telephone number.
Input from the first digits.
The cursor is displayed at the input position. Press (>) or (<) of
machine monitor mode selector switch 2 and display "0 - 9 ".
To leave a blank, select "*".
When the input value is decided, press ( ) of machine monitor
mode selector switch 1. The cursor will move to the next
position.
5. Repeat the procedure in Step 4 until the last digit. At the last digit, press ( ) of machine monitor mode selector
switch 1 to return to the previous screen.
If there is a mistake in the input or the input is to be stopped, press ( ) of machine monitor mode selector switch
1 to return to the previous screen.
6. When completing the operation, press ( ) of machine monitor mode selector switch 1 twice or turn the starting
switch OFF.
3 - 28
https://www.besttruckmanuals.com/
OPERATION
Advertisement
Chapters
Table of Contents
