Periodic Replacement Of Safety Critical Parts - Komatsu ecot3 GALEO HM300-2 Operation And Maintenance Manual

MAINTENANCE

PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS

PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
To ensure safety at all times when operating or driving the machine, the user of the machine must always carry out
periodic maintenance. In addition, to further improve safety, the parts in the safety-critical parts list on the next page
must also be replaced at the specified interval. These parts are particularly closely connected to safety and fire
prevention, so please contact your Komatsu distributor to have them replaced.
Material quality of these parts can change as time passes and they are likely to wear out or deteriorate. However,
it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance. Hence, it is required
to replace them with new ones regardless of their condition after a certain period of usage. This is important to
ensure that these parts maintain their full performance at all times.
Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the periodic
replacement time for the part has not yet arrived.
If any of the hose clamps show deterioration like deformation or cracking, replace the clamps at the same time as
the hoses.
Also perform the following checks with hydraulic hoses which need to be replaced periodically. Tighten all loose
clamps and replace defective hoses, as required.
When replacing hoses, always replace O-rings, gaskets, and other such parts at the same time.
https://www.besttruckmanuals.com/
4 - 15