Mounting Suction Plate On The Lifting Device - probst 5272.0006 Operating Instructions Manual

Mounting suction plate on the lifting device

The suction plate and mounting material are not included in delivery.
DANGER
DANGER
25/44
Risk of injury from turning on by accident.
►
Turn off the lifting device before mounting the suction plate.
Risk of injury from improper mounting material.
►
The suction plate must be chosen by the customer depending on the load
(surface, thickness, weight).
The customer is required to document the static strength and holding
force depending on the potential vacuum and to adhere to safety factors.
The Standard DIN EN 13155 in its current valid version should be used as a
template for mounting.
►
The suction plate must be mounted with the appropriate mounting
material.
•
2 M12 – 4.6 threaded spindles, length: 247 mm
•
2 DIN 582 E – M12 – C15 zinc-coated ring nuts