Type Plate; Vacuum Generator; Suction Plates; Safety Features - probst 5272.0006 Operating Instructions Manual

Type plate

The type plate is used to identify the device. Always provide the specifications on the
type plate when ordering spare parts, making warranty claims or for other inquiries
about the device.
The type plate is attached firmly to the exterior of the lifting device.
The type plate contains the following information:
•
Device type
•
Part number
•
Order number
•
Serial number
•
Year of manufacture
•
Device weight
•
Load-bearing capacity
•
Voltage

Vacuum generator

Turn on the vacuum generator using the on/off switch or one or two vacuum pumps.
1 vacuum pump Longer battery life
2 vacuum pumps Shorter evacuation time and higher airflow
If the vacuum falls below -0.53 bar, the vacuum pumps automatically turn on and raise the vacuum pressure
back to -0.66 bar.

Suction plates

Suction plates (not included in delivery) are for applying suction to the load (see section 5.3). Only objects
with flat, dense surfaces are suitable to be lifted with this device.

Safety features

The lifting device has the following safety features:

Red flashing light (monitors the operating vacuum and power failures)

Vacuum switches

Gauge with red danger range indicator

1 vacuum reservoir

Load safeguard chain
Inspect safety features (see section 9.2 for maintenance interval)
21/44