Annual Inspection - probst 5272.0006 Operating Instructions Manual

General condition of the device
Leak test
Drain condensation
Check the condition of the load-securing chain
1) Once the load has been held by the load securing chain, the load securing chain must be properly tested and replaced if
necessary. Damaged load-securing chains must not be used any further!!

Annual inspection

 It is the contractor's responsibility to ensure that the device is checked by an expert in
periods of max. 1 year and all recognized errors are removed (→ see DGUV regulation
1-54 and DGUV norm 100-500).
 The corresponding legal regulations and the regulations of the declaration of
conformity must be observed!
 The expert inspection can also be done by the manufacturer Probst GmbH.
Contact us at: service@probst-handling.de
 We recommend affixing the inspection sticker "„Sachkundigenprüfung / Expert
inspection" in a clearly visible place (order no.: 2904.0056+Tüv sticker with year
number) after the inspection has been done.
The specialist inspection must be documented.
Device Year
43/44
1)
Date Specialist
Interval
Daily Weekly Monthly Every
X
X
Company
Yearly
six
months
X
X
X
X