Table of Contents
Advertisement
3. Installing and Using
3.1
Install the Ethernet Over VDSL
Converter
The Converter does not require any software configuration.
Users can immediately use any feature of this product simply
by attached the cables and plug power on. There is some
key limitation on the Ethernet over VDSL converter. Please
check the following items:
The device is used for point-to-point connection only
and allows data and voice work on the same telephone
or ISDN lines.
Two RJ-11 connectors for VDSL port. One for voice
device connection (like telephone) and the other one for
network link connection.
Depending on the quality of telephone line, the
maximum distance of one VDSL segment is 1.2km
(4000ft) with AWG 24 telephone wires. The distance
will change by the quality of telephone wires.
3.2
LAN to LAN connection
Two sets of the converters could be used to link two local
Area networks that are located in different areas. Through
the normal telephone line, it could setup a 11Mbps symmetric
backbone, but one converter must be Master(VC-101M) and
the other one is Slave(VC-101S).
16
VDSL Converter
Advertisement
Table of Contents
