Table of Contents
Advertisement
5. Installing the Converter
Please follow these steps to install the PoE+ Media converter:
l Turn off the power of the device/station in a network to which
the GTP-805A will be attached.
l Ensure that there is no activity in the network.
l Attach fiber cable from the GTP-805A to the fiber network.
l Attach a Cat.5/5e/6 UTP cable from the 10/100/1000BASE-T
network to the RJ45 port on the GTP-805A.
l Connect the 52V~56V DC power adapter to the GTP-805A
and verify that the Power LED lights up.
l Turn on the power of the device/station; the TX Link and FX
Link LEDs should light up when all cables are attached.
RJ45/STP, UTP Cat5/5e/6, straight/crossover cable
is accepted.
Please refer to section 8 for more about the wiring
Note
distance of your TP, optic-fiber networks.
1000BASE-SX/LX
SFP Transceiver
1000BASE-SX/LX
LC Fiber
Figure 5-1: GTP-805A Installation
PoE
10/100/1000BASE-T UTP
13
Advertisement
Table of Contents
