Dc Voltage Dip Switch - Planet IPOE-17 S Series User Manual

3.3 DC Voltage DIP Switch

It provides three kinds of DC power output through its DIP switch and its
voltage and current are shown below:
1. Please check the power requirements of the device carefully
that is going to get the power from the IPOE-17xS Series.
2. If the power requirement is higher than the IPOE-17xS Series
that can supply, current overload might shut down the IPOE-
17xS Series itself. Thus, it will also shut down your device as
well.
3. Please ensure the output voltage is correct for remote device.
Otherwise, it will damage your remote device.
Do not switch on/off the Power DIP during operation. Other-
wise, it will damage your IPOE-17xS Series and remote device.
If you want to switch from one output voltage to another via
DIP switch, plug out the "PoE In" cable and wait for 3 seconds
until the PoE Input LEDs are completely OFF.
10/100/1000/
2.5G/5G/10G
Power Output
V+
V+
12V
24V
DC Voltage
12V 19V 24V
Figure 3-3: DIP Switch of IPOE-17xS Series
19V
9