2.1.3 Media Converter Upper Panel
The upper panel of the Industrial Media Converter consists one
terminal block connector within two DC power inputs. Figure 2-4
shows the upper panel of the Industrial Media Converter.
Figure 2-4 Industrial Media Converter Upper Panel.
2.1.4 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of
Industrial Media Converter is used for two DC redundant inputs.
Please follow the steps below to insert the power wire.
1. Insert positive / negative DC power wires into Contacts 1 and
2 for Power 1 or 5 and 6 for Power 2.
14
V1- V1 +
V2 - V2 +